× График движения Ro-Ro и паромов Отслеживание груза Расчет тарифов и продажа билетов Транспортные тарифы Электронная форма обращения для подрядчиков Обращение гражданина

НАШ ФЛОТ

hero_thisisbayer_3200x556

Генерал Алиага Шыхлински

 

Dimensions

Length overall, m

138,4

Length between perpendiculars, m 

121,75

Breadth overall, m  

54,0

Breadth of each hull, m  

17,5        

Distance between hulls, m   

20,0

Hull height up to the main deck, m 

9,0

Hull height up to the upper deck, m  

13,0

Overall height, m

59

Estimated draft, m 

4,0

Displacement of vessel fully loaded

with cargo, t

10650

Displacement of the vessel unloaded, t

3993

Deadweight, t  

3343

Net tonnage, t  

6000

Gross tonnage, t 

19813

Capacities

Crew, person

56

Speed, knots

11,4

Sea going capacity, points

6

Clear deck area, m2

4250,0

Clear deck area (max L x B)

85 х 50

Freight carrying capacity, t

1600

Cargo on deck, t  

1400

Cargo in hold, t

200

Deck strength, t/m2

5

Deck strength, t/m2 (platform between the crane and superstructure 10x10m)

10

Fuel reserves, t

600

Oil, t

40,0

Fresh water, t 

100

Utility water, t

450

Fuel consumption, kg/h

225

Endurance, days

30

General Data

IMO number

8129668

Port of registry / Call sign

Baku / 4JCK

Purpose Of The Ship

Catamaran-type Crane Vessel

Type of the Ship

Self-propelled, steel, double hull marine vessel with swivel crane having carrying capacity of 2 x 300 tons on the port side hull and with an engine room on the starboard side hull and with a continuous main deck, flat transom stern.

Flag

Azerbaijan

Year built / builder

1987 / "Wartsila" JSC Shipyard Turku city, Finland

Class

KM (*) L3[1] AUT2 Special Purposes Ship-Catamaran

Machinery and Propulsion

Main engines

Wartsila Vassa 6R32 type Diesel engine with a capacity of 3x1845 kW (3 x 2510 e.h.p.) at 750 rpm.

Azimuth thruster

Two propulsion electric motors operating with direct current and with capacity of  2 x 1700 kW at 1000 rpm,  220V voltage and  with two pieces of four - bladed, 2930 mm diameter  propeller screw on the nozzles of "Aquamaster" type rudder propellers.

Bow thruster

With CPP (controllable pitch propeller) on both hulls, with a capacity of 400 kW.

Diesel generators

3 x diesel harbor generators – "Baykal-300" type diesel with a capacity of 3 х 220 kW (3 х 300 e.h.p) at 1500 rpm. Generators manufactured by "Stremberg" with a capacity of 3 x 275 kVA at 1500 rpm, voltage 660V, 50 Hz.

Emergency generators

One emergency diesel generator. Diesel generator with a capacity of 110kW (150 h.p.) at 1500 rpm, a generator with a  capacity of  125 kVA,  voltage 380 V and 50Hz frequency

Anchor Handling, Mooring and Special Equipment

Anchor devices

4 x autonomous anchor devices (double winch with one power unit) are installed for the purposes of anchoring of the ship at sea with depth up to 200 m. Anchor winches have a maximum pull of 1125 kN (112.5 tons). The holding power of the drum brake tape is 1850 kN (185t).

Wire drums

2 x wire drums on each bow winch with a capacity of 1500 m of steel wire in diameter of 77 mm and 51mm. The power of the drive motor is 370kW. Whereas, there are two wire drums stern winches with a capacity of 1500 m of steel wire in diameter of 51 mm.

Anchors

Special anchors (6 basic weighing 10000 kg each and 2 weighing 11100 kg each) for anchoring the ship. Each anchor is equipped with a signal buoy (8 pcs.) with lamps and radar reflectors to indicate the location of the anchor.

Mooring gear

2 x electric drive spikes with a pulling power of 120kN (12t), 2 x electric mooring winches with a pulling power of 160kN (16t).

Diving equipment

Includes a compressor unit, a diving appliances set with a depth of immersion of 60m, a stationary pressure chamber for 4 persons in two compartments at pressure of 10 bar.

Additional equipment

Pile-driving equipment; Cargo-fastening equipment – 30 pieces of special blocks,  with a metal frame and with dimensions of 6000 x 1000 mm, wooden part thickness  200 mm

Deck Crane

General information

"Offshore" type electrical swivel crane (360 degrees) manufactured by "KONE" Holland, with a carrying capacity of 600 tons. The crane is single boom type and is installed on the port side hull of the ship. The crane has been equipped with a main girder with lifting capacity of 600 t which can quickly be attached to the main lifting of the crane. Rotation speed of the crane is 0.25 RPM. Crane operation is permissible during sea swells up to 3 points, and wind force up to 12 mps (6 points).

Boom

2 x main lifting mechanisms with a lifting capacity of 2 x 300 t (2 x 220 kW DC electric motors);

1 x auxiliary, SWL=150t (1 x 220 kW DC electric motor) (Aux1);

1 x auxiliary, SWL=20t (1 x 100 kW DC electric motor) (Aux2); The simultaneous work of the main lift of 2 x 300 tons and the auxiliary lift of 150 tons is allowed.

The boom lifting mechanism is equipped with two direct current electric motors with a capacity of 2 х 220 kW. The rotation mechanism is equipped with six DC (direct current) electric motors in vertical position and with a capacity of 6 x 100 kW.

Crane boom maximum reach above the water

Main: 39m / Aux1: 69m / Aux2: 67m

Minimum reach

Main: 26m / Aux1: 30m / Aux2: 9m

Lifting height

Main: 75+29m / Aux1: 60+45m / Aux2: 75+29m

Lifting speed at the max. load, m/min

Main: 2,9 / Aux1: 0-6 / Aux2: 0-30

Safety Equipment

Life Boats

2 x 65

MES

2 x 253

Lifejackets

314

Immersion Suits

25

FRB

15

Accommodation

Max per LOB, person

103

1 berth cabins

17

2 berth cabins

27

4 berth cabins

8

Hospital

1

Navigation Equipment

MF/HF FS-2570 – 1pcs, VHF FM-8500-2pcs, Kenwood-760(G) – 1 pcs, R/buy McMurdo E3a  – 1pcs, VHF McMurdo R1 – 3 pcs, McMurdo RT9 SART – 2 pcs, UAIS FA-150  – 1 pcs, VHF ICOM IC-M25 – 2 pcs, Kenwood TK-2207 – 3 pcs, RLS FAR-2817 – 2 pcs, INM-C Felcom-15  – 1 pcs, INM. TT-3000 SSAS – 1 pcs